revoseal JG/JP
Embossed flat profile gasket
The internationally patented geometry of the higher external and internal teeth completely encapsulates the graphite or PTFE overlay. The tooth geometry is calculated to realize ideal compression of the graphite and a dual metal gasket even when using low grade screws. The revoseal JG or JP (encapsulated flat profile gaskets) combines the advantages of metallic and soft material sealing in an ideal way.
Highlights
he effective gasket width can be adapted in order to achieve optimum sealability in accordance to the Technical Instructions on Air Quality Control (TA-air), VDI 2290 according to
DIN EN 1591
Temperature: - 270°C to +1000°C (dependent on the carrier material)
Pressure: from vacuum to 400 bar (1,500 lbs)
Lowest leakage rates of all gaskets available on the market
Standard material: 1.4571 (additional materials on request)
Total thickness 4.2 mm (additional thicknesses on request)
JG/JP profiles reproduce the tongue and groove principle
Fire Safe Certificate according to API 607 (also for PTFE) and blow-out resistance according to VDI 2200
Product video JG-JP
Exceptionally productive equipment requires exceptionally high-performing gaskets. Our product range:
| Type | Cross section | Designation | Download |
|---|---|---|---|
| JG/JP 1 |  |
Encapsulated flat-profile gasket suitable for tongue & groove and male and female facings according to DIN EN 1514-4 TG and SR. | Download PDF  |
| JG 2 |  |
Encapsulated flat-profile gasket with centring ring and predetermined breaking groove for raised face and full face flanges form A and B according to DIN EN 1092-1, as well as flanges according to ANSI B 16.5 / B 16.47-A and B 16.47-B. | Download PDF |
| JP 2 |  |
Encapsulated flat-profile gasket with centring ring and predetermined breaking groove for raised face and full face flanges form A and B according to DIN EN 1092-1, as well as flanges according to ANSI B 16.5 / B 16.47-A and B 16.47-B. Recommended for pressure higher than 200 bar and temperatures exceeding 500 °C. | Download PDF |
| JP Top |  |
JP TOP has the same properties as JP 2. In addition it has a secondary sealing of graphite or PTFE. This design is especially suited for cold chemicals building a corrosive medium in contact with air (atmosphere). | Download PDF |
| Vario |  |
JG and JP gaskets are also available with our Vario-centering system (see revoseal system Vario). | Download PDF |
